P.O. Box 208 · 384 Broyles St. · Sparta · TN · 38583
Phone: 931-836-1212 · Fax: 931-836-2002
|
10 Track
Universal Chaser Controller Settings Instructions |
| The photograph on the right is a font view of the circuit board located inside the controller. Note: All settings should be applied with the controller unplugged. Remove screw and the front panel. The dip switch #1 and jumpers #2 are adjustable with needle nose pliers. The dip switch #1 has eight toggle switches. Gently depress the switch that corresponds with the diagram for your desired setting. The jumpers #2 are pulled up and off the posts and pressed into place with pliers. |  |
 |
Each receptacle in the photograph on the left represents one track. The chase pattern will turn on each track according to the settings. |
| 7 Track Chase Steps: 7 Pattern: 1, 2, 3, 4, 5, 6, 7 repeat |
 |
| 7 Track Chase with
a 2 step delay on 7 Steps: 9 Pattern: 1, 2, 3, 4, 5, 6, 7, 7, 7 repeat |
 |
| 7 Track Chase with
a 2 step delay on 7 and a 1 step delay on 1 Steps: 10 Pattern: 1, 1, 2, 3, 4, 5, 6, 7, 7, 7 repeat This setting requires a special order jumper wire. |
 |
| 8 Track Chase Steps:8 Pattern: 1, 2, 3, 4, 5, 6, 7, 8 repeat |
 |
| 8 Track Chase with
a 2 step delay on 8 Steps:10 Pattern: 1, 2, 3, 4, 5, 6, 7, 8, 8, 8 repeat |
 |
| 8 Track Chase with
a 1 step delay on 1 and 8. Steps:10 Pattern: 1, 1, 2, 3, 4, 5, 6, 7, 8, 8 repeat This setting requires a special order jumper wire. |
 |
| 9 Track Chase Steps:9 Pattern 1, 2, 3, 4, 5, 6, 7, 8, 9 repeat |
 |
| 9 Track Chase with
a 1 step delay on 1 Steps:10 Pattern: 1, 3, 4, 5, 6, 7, 8, 9, 10 repeat Receptacle 2 is not used |
|
