3 Track Universal Chaser Controller Setting Instructions

P.O. Box 208 · 384 Broyles St. · Sparta · TN · 38583
Phone: 931-836-1212 · Fax: 931-836-2002

3 Track Universal Chaser Controller Settings Instructions

The photograph on the right is a font view of the circuit board located inside the controller. Note: All settings should be applied with the controller unplugged. Remove the two screws and the front panel. The jumpers are adjustable with needle nose pliers. The jumpers are pulled up and off the posts and pressed into place with pliers.

Each receptacle in the photograph on the left represents one track. The chase pattern will turn on each track according to the settings.

2 Track Chase Steps: 2 Pattern: 1, 2, repeat Receptacle 3 is not used.
3 Track Chase Steps: 3 Pattern: 1, 2, 3, repeat
3 Position Animation Steps: 4 Pattern: 1, 2, 3, 2 repeat

Login for Customer Service and Order Tracking