Commercial L.E.D. Lights

These New COMMERCIAL Sets Look Like the "Standard" L.E.D. Sets...So What's Different?

  • 4" bulb spacing for the new introduction, M5 (mini) and G 12 

  • Wider 6" bulb spacing for C6 shape...compared to 4" spacing offered in the standard LED. sets. 

  • Closer 6"bulb spacing for G25 shape...compared to 8" spacing offered in the standard LED. sets. 

  • Wider 12" bulb spacing for C7 and C9...compared to the 8"spacing found in the standard sets. 

  • Proprietary plugs for safer, more secure connections. Coaxial connections offer watertight, tamper-proof solutions.

Incredible 150-set Connectability for the Entire Line of Commercial-Grade L.E.D!

YES...you read that correctly. This new commercial-grade series offers unparalleled Connectability thanks to heavier 20-gauge wiring and other engineering improvements.  At only .02 amp current (1.8 watts) per set, these sets are revolutionizing our industry and all related lighting applications around the world.

 
 
 

SELLING FEATURES AND BENEFITS

  • VIBRANT COLOR PALETTE
  • LED LIGHTS LAST UP TO 200,000 HOURS FOR COLORS-THERE IS NO FILAMENT TO BURN OUT
  • LED LIGHTS CONSUME 90% LESS ELECTRICITY THAN REGULAR MINI LIGHTS
  • 6 BULB SPACING-PREFERRED BY MOST COMMERCIAL DECORATORS
  • FUSED BULBS, ELIMINATES CORROSION, LOOSE AND MISALIGNED CONTACTS
  • ACRYLIC CONCAVED LENS COVER, VIRTUALLY INDESTRUCTIBLE
  • UL LISTED FOR INDOOR AND OUTDOOR USE
  • LED = LIGHT EMITTING DIODE

Why Non-Replaceable Bulbs?

LEDs are polarity specific.  If a bulb is removed and then turned around and reinserted, it will not work. If several bulbs have fallen out of the socket over time then it is almost impossible to determine which one is in backwards.  In these cases, often the entire set will not light. GKI / BETHLEHEM LIGHTING L.E.D. DIODES CANNOT BE REMOVED.

LEDs are power specific.  Each color of LED requires a different amount of power tin order to work at its highest efficiency.  Most replaceable bulb sets are supplied with a red L.E.D. (which is the cheapest).  If you replace a lost or defective Blue LED with a red replacement LED it will soon burn out because the socket for the Blue is wired with a much higher power than that for the red.  If you were to place a Blue LED in a socket designed for a Red LED. Then it would hardly light.  IN GKI / BETHLEHEM LIGHTING SETS, EVERY SOCKET IS SPECIFICALLY WIRED FOR THE COLOR OF LED. THAT IS INSERTED AND PERMANENTLY AFFIXED SO THAT THE BEST PERFORMANCE IS GUARANTEED.

Rust issues make the best case for a non-replaceable LED because the leads of the LED and the copper wire of the cord are different materials, they are susceptible to rust.  If any moisture is introduced into the environment of the bulb either in the form of condensation or actual water, it begins to rust.  The rusting process is very fast.  In these cases, the bulb will rust and literally fall out of the socket within only a few months. THE NON-REPLACEABLE LED IS COMPLETELY WATER TIGHT-NO MOISTURE CAN ENTER THE AREA OF THE CONNECTION AND THEREFORE NO RUST CAN OCCUR.


Click here to go to our LED page.

Close Window