The Future of Christmas lights! The L.E.D. Christmas lights we sell here are the top of the line most state of the art Christmas lights available anywhere online. Think about this, colors that will never fade, lights that stay lit using minimal power, and no glass to ever break. The bulbs themselves are housed in hard plastic that will protect them for years on end. Most lighting applications that are lit with Mini Lights and or C7 style bulbs can be lit with LED bulbs! You have the same effect of mini lights, C7, or C9 bulbs with all the perks of LED bulbs and you won't have to worry about fixing a string if they go out or replacing burnt out or broken bulbs, because LED light strings are more durable and dependable. The cost of most LED Christmas Lights will scare most consumers away at first but after looking at all the benefits that LEDs provide they will pay for them self season after season. You won't have to buy new lights every season, just pull the L.E.D Light sets out of storage and decorate.

Why Should You Invest in L.E.D Sets?

Compared to regular mini lights, LEDs cost more up front...but they literally pay for themselves through energy savings and long-term durability...thus virtually eliminating the need for set replacement!

Just A Few of the Benefits of L.E.D. Mini Lights...

200,000 hour rated bulb life...a truly remarkable estimated life span for a miniature light set.

Each set uses 80-90% less energy...compared to regular light sets - so they actually pay for themselves!

Two (2) bulb shapes to choose from:

A) C6"Strawberry" (looks like a faceted pinecone)

B) Razz Berry (round and faceted).

No filament to burn out – the bulb illumination is derived by microchip construction.
Non-breakable bulbs - they're made of durable polyresin material!
Vibrant colors won't fade because there's no paint pigment to fade through heat generation.
Up to 15 Sets end to end, These are UL approved for 3 sets end to end but after testing it is safe to plug up to 15 sets end to end..
Waterproof, Injection-molded construction.

Still not impressed? Click Here to see our Commercial LED Light Description

Our Commercial LEDs give you even more bulb life and connectability!

SELLING FEATURES AND BENEFITS

VIBRANT COLOR PALETTE
LED LIGHTS LAST UP TO 200,000 HOURS FOR COLORS-THERE IS NO FILAMENT TO BURN OUT
LED LIGHTS CONSUME 90% LESS ELECTRICITY THAN REGULAR MINI LIGHTS
6” BULB SPACING-PREFERRED BY MOST COMMERCIAL DECORATORS
FUSED BULBS, ELIMINATES CORROSION, LOOSE AND MISALIGNED CONTACTS
ACRYLIC CONCAVED LENS COVER, VIRTUALLY INDESTRUCTIBLE
UL LISTED FOR INDOOR AND OUTDOOR USE
LED = LIGHT EMITTING DIODE

Why Non-Replaceable Bulbs?

LEDs are polarity specific. If a bulb is removed and then turned around and reinserted, it will not work. If several bulbs have fallen out of the socket over time then it is almost impossible to determine which one is in backwards. In these cases, often the entire set will not light. GKI / BETHLEHEM LIGHTING L.E.D. DIODES CANNOT BE REMOVED.

LEDs are power specific. Each color of LED requires a different amount of power tin order to work at its highest efficiency. Most replaceable bulb sets are supplied with a red L.E.D. (which is the cheapest). If you replace a lost or defective Blue LED with a red replacement LED it will soon burn out because the socket for the Blue is wired with a much higher power than that for the red. If you were to place a Blue LED in a socket designed for a Red LED. Then it would hardly light. IN GKI / BETHLEHEM LIGHTING SETS, EVERY SOCKET IS SPECIFICALLY WIRED FOR THE COLOR OF LED. THAT IS INSERTED AND PERMANENTLY AFFIXED SO THAT THE BEST PERFORMANCE IS GUARANTEED.

Rust issues make the best case for a non-replaceable LED because the leads of the LED and the copper wire of the cord are different materials, they are susceptible to rust. If any moisture is introduced into the environment of the bulb either in the form of condensation or actual water, it begins to rust. The rusting process is very fast. In these cases, the bulb will rust and literally fall out of the socket within only a few months. THE NON-REPLACEABLE LED IS COMPLETELY WATER TIGHT-NO MOISTURE CAN ENTER THE AREA OF THE CONNECTION AND THEREFORE NO RUST CAN OCCUR.